Laboratory Furniture
As manufacturers we are able to offer choice & flexibility. Our standard under bench unit is 1000mm or 500mm, however we can accommodate specific sizes and colours at no extra cost. The CLF range is as follows; |
Suspended Support System
|
Pedestal Support System
|
Mobile Support System
|
I.T Desking System
|
Metal Furniture
|
The CLF range of suspended furniture is designed for areas where hygiene and accessibility is key. The units are mounted off the floor by a cantilever steel support system. All units are easily de-mounted and re-located giving maximum versatility making this our most popular range of furniture.
The CLF pedestal range is worktops supported entirely on cantilever leg supports. The underbench storage is entirely independent of the benching and can therefore be provided fixed or on castors. Legs are fabricated from 60 x 30 mild epoxy coated steel. The design allows for a 150mm service void at the rear of the units and for an extra cost all services can be concealed with removable back panels where knee spaces occur. When there is an adequate number of underbench units worktops can be fixed directly onto the unit tops. Suitable for very heavy equipment.
The CLF computer benching range is constructed from 30mm x 40mm heavy duty epoxy coated steel. The work surface is made from 28mm Postform or 18mm MDF ensuring a heat, scratch and stain resistance. Cable tidies are fitted at 1000mm intervals in the system. Mobile storage units are ideal under computer benches.
The CLF range of metal cabinets include standard base units and low base units and clean room furniture mounted on wall brackets to allow full floor cleaning. All units are fully lockable. The metal is fire resistant and the powder coat finish formulated so that no toxic fumes are emitted in the case of fire.